This will serve as a gateway for the device that you want to connect to the RPi ethernet port. Set your ethernet adapter to a static IP address We'll also configure some iptables settings to make a NAT between the ethernet adapter and the Wifi connection. This will allow the device connected to the RPi through ethernet to get an IP address from the RPi and also to for the RPi to pass DNS queries. To do this we're going to use dnsmasq to set up the RPi to be a DHCP server and set up some custom DNS settings. You can do other things like overclocking your CPU, set up ssh and ftp connections, and change your boot settings to boot to a command line or the desktop. This will give you access to the entire storage space on the HD card.įeel free to look at the other options that are available to you through this interface. Expand the file system to use the entire SD card.If you get the annoying PERL warnings about the locale cannot be set you can resolve it by using these instructions. This will give you the right keyboard settings, time settings and location for installing other software from the nearest repos. Don't leave devices on your network vulnerable by leaving the default passwords on your RPi for the pi and root users. You don't have to do this but there are a couple of things that you should do: This will bring up the raspi-config interface an allow you to configure other options your Raspberry PI. You can now configure other options for your Pi. When your Raspberry Pi has successfully connected to your Wifi you should see the Wifi symbol in the menu bar in the upper right corner of the screen for the Raspberry Pi.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |